Reed Mfg PEPEEL12 PE Pipe Peeler, 6" - 12"

PE Pipe Peeler prepares the outside diameter of polyethylene pipe for electrofusion by removing the oxidized layer and contaminates. PE Pipe Peeler can be used on the edge of the pipe or anywhere along the pipe with sufficient clearance for turning the tool around the pipe. Chain with thermoplastic rollers of acetel copolymer and plated side plates resist corrosion. Spring-loaded blade keeps consistent pressure on the pipe for a smooth finished surface. This blade tension means the blade does not skip.  Its carbide blade provides a cutting edge on each side. Rotate blade before replacement and receive three additional cutting edges.

• One tool peels a range of pipe, not just a single size.
  
• The tool spirals back onto the pipe and peels a clean path every revolution.
• Peeler creates a uniform peel even on out-of-round pipe as its spring-loaded design adjusts for high and low spots on pipe.
• Strong thermoplastic rollers and plated sides on chain resist corrosion.
  
• Pipe Capacity in-nom.:  6 - 12

Parts Diagram 
PE Pipe Peeler Instructions

PE Pipe Peeler Flyer