Reed Mfg PPRK4 Clean Ream Extreme® Plastic Pipe Fitting Reamer, 4-Piece Kit w/ Case

Money-saving plastic pipe reamers are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused. In this era of green living and recycling, try these reamers on PVC, CPVC or ABS to save time and material costs. Plastic Pipe Fitting Reamers fit into standard ½” drills. PPR reamers work great for vent lines, drain lines, and water lines. Its carbide cutting insert provides a cutting edge on each side. Rotate before replacement and receive three additional cutting edges.

NOTE: Clean Ream Extreme® Plastic Pipe Fitting Reamers are NOT recommended for use on pressurized systems.

• Convenience kit with case including four commonly used reamer sizes:  1-1/2, 2, 3 and 4 inch.
• Clean leftover pipe and solvent cement residue from Sch. 40 PVC, CPVC or ABS fittings.
• Reduce labor time and materials costs by reusing the fittings.
• Fits into standard 1/2 inch drill.
• Pilot diameter aids in cutting on center and stops tool at the proper cutting depth.
• Clean edge of PPR with solvent to remove the thin film left by solvent cement.
• Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.
  
• Kit with PPR150, PPR200, PPR300, PPR400 in a hard plastic case
• Shaft Size:  3/8" hex

Parts Diagram

Instructions