Sheet Metal Tools

Midwest MWT-6510C Left & Right Offset Aviation 2-Piece Set MIDWEST® 2 Piece Offset Aviation Snip Sets include an Offset Left and Offset Right A...

Midwest MWT-6510LO Left-Cutting Offset Aviation Snip - Blackout Series MIDWEST® Offset Aviation Snips flow material away from blades and position u...

Midwest MWT-6510L Left Offset Aviation Snip MIDWEST® Offset Left Cut Aviation Snips flow material away from blades and position the user’s hand abo...

Midwest MWT-P6510RLS Left, Right & Straight Offset Aviation 3-Piece Set MIDWEST® 3 Piece Offset Aviation Snip Sets include an Offset Left, Offs...

Midwest MW-A1 3-1/2" Scratch Awl Marker MIDWEST® Scratch Awl Markers are 3 1/2″ (88.9mm) and forged from 8630 steel for a long lasting marking poin...

Midwest MWT-6510S Straight Offset Aviation Snip MIDWEST® Offset Straight Aviation Snips flow material away from the blades and position the user’s ...

Midwest MWT-CDT01 Cleat Driver MIDWEST® MWT-CDT01 Cleat Driver Tool is a new way for sheet metal workers to install & remove drive cleats more ...

Midwest MWT-6900L Upright Left-Cutting Aviation Snip MIDWEST® UPRIGHT® Left Aviation Snips feature ergonomic handle action that reduces wrist range...

Malco Tools 12F 12-Inch Sheet Metal Folding Tool Malco’s 12F, 18F, and 24F Sheet Metal Folding Tools offer a premium choice for bending and forming...

Midwest MWT-A2 Scribe Mark & Measure Tool MIDWEST® Scribe Markers have ten preset scribing depths from 1/8″ to 1″ and are used to scribe mark s...

Malco Tools S3R RedLine 3-Inch Offset Hand Seamer Malco Hand Seamers, with forged steel jaws, are the premier choice for bending, folding, flatteni...

Malco Tools S6R 6" Hand Seamer with Forged Jaws Malco Hand Seamers, with forged steel jaws, are the premier choice for bending, folding, flattening...

Midwest MWT-6900R Upright Right-Cutting Aviation Snip Our GLIDE-TECH® FORGED BLADES produce the cleanest, fastest, most comfortable cut possible wi...

Midwest MWT-C5 5-Blade Sheet Metal Crimper MIDWEST® 5-Blade Duct Crimpers feature a 1-5/8″ throat depth which corrugates the end of sheet metal duc...

Malco Tools N1R RedLine 13/16" Hand Notcher The N1R Hand Notcher makes a clean 30° “V” shaped cut in 24-gauge (0.71 mm) galvanized steel.  Maximum ...

Malco Tools 18F 18-Inch Sheet Metal Folding Tool Malco’s 12F, 18F, and 24F Sheet Metal Folding Tools offer a premium choice for bending and forming...

Malco Tools HC1 “Gold Standard” Sheet Metal Hole Cutter, 2" - 12" Malco’s sheet metal hole cutter quickly installs into the chuck of any corded or ...

Midwest MWT-6510R Right Offset Aviation Snip MIDWEST® Offset Right Cut Aviation Snips flow material away from blades and position the user’s hand a...

Malco Tools SL1R RedLine Snap Lock Punch for Sheet Metal Malco’s SL1R Sheet Metal Snap Lock Punch raises a louvered shaped projection on metal edge...

Midwest MWT-6716B Bulldog Aviation Snip MIDWEST® Bulldog Aviation Snips cut trim and thick material up to 16 gauge cold rolled steel and cut multip...

Malco Tools HC1B Pivot Pin Set for HC-1 Hole Cutter

Malco Tools S2R 3" Hand Seamer with Forged Jaws Malco Hand Seamers, with forged steel jaws, are the premier choice for bending, folding, flattening...

Midwest MWT-6716LO Left-Cutting Aviation Snip - Blackout Series Our GLIDE-TECH® FORGED BLADES produce the cleanest, fastest, most comfortable cut p...

Malco Tools 24F 24-Inch Sheet Metal Folding Tool Malco’s 12F, 18F, and 24F Sheet Metal Folding Tools offer a premium choice for bending and forming...

Midwest MWT-X1 12-Inch Duct Slitter Our Duct Slitter pierces and elongates a snip starter hole in sheet metal duct. Our square forged steel shaft p...

Midwest MWT-SO6 6-Inch Offset Hand Seamer Midwest's Interchangeable Blade Seamer tool system offers flexibility and tradesmen quality. A modular se...

Malco Tools C5A2 TurboCrimper® IMPACT Power Crimper Get the competitive edge with a labor and cost saving TurboCrimper® Impact driver attachment. B...

Malco Tools AVM7 EV Mini Offset Aviation Snip, Right Cutting With an overall length of only 7-1/8 inches (181 mm), the AVsMini easily goes to work ...

Midwest MWT-657N Knifti-Cut® Precision Utility Snips MIDWEST® KNIFTI-CUT® Precision Utility Snips feature forged blades for exceptional strength an...

Midwest MWT-6716S Straight Aviation Snip MIDWEST® Straight Cut Aviation Snips are ideal for trimming metal and other sheet materials. Used for cutt...

Midwest MWT-6716L Left-Cutting Aviation Snip MIDWEST® Left Cut Aviation Snips are ideal for trimming metal and other sheet materials. Used for cutt...

Malco Tools AVM6 EV Mini Offset Aviation Snip - Left Cutting With an overall length of only 7-1/8 inches (181 mm), the AVsMini easily goes to work ...

Midwest MWT-S36 3" / 6" Interchangeable Blade Hand Seamer MIDWEST® 3″ & 6″ Interchangeable Blade Straight Handle Seamer Sets include both 3″ X ...

Midwest MWT-L1 Snap Lock Punch MIDWEST® Snap Lock Punches feature a forged punch for strength and durability that is precision milled for punching ...

Midwest MWT-6716SO Straight Aviation Snip - Blackout Series Our GLIDE-TECH® FORGED BLADES produce the cleanest, fastest, most comfortable cut possi...

Malco Tools CB Replacement Hole Cutter Bit (Single Pack) Both the HC1 and HC2 sheet metal hole cutter feature Malco’s “Gold Standard” Cutter Bits. ...

Malco Tools DS3 Locking Duct Stretcher The Malco Locking Duct Stretcher pulls duct sections together and holds them in place while freeing both han...

Malco Tools C5R RedLine 5-Blade Sheet Metal Crimper Equip yourself with only the best during HVAC installation with the Malco 5 Blade Sheet Metal C...

Malco Tools AV6 Offset Aviation Snip with Power-Fit™ Hand Grips - Left Cutting Get a better grip with Malco’s Offset AV Aviation Snips! Malco Offse...

Midwest MWT-S1 3″ Interchangeable Blade Straight Handle Seamer MIDWEST® 3″ Interchangeable Blade Straight Handle Seamers feature 3″ X 1-1/4″ forged...

Malco Tools DB1 Dead Blow Hammer One-piece construction of weather-resistant urethane compound of Malco’s Dead Blow Hammer ensures long service lif...

Midwest MWT-6716RO Right-Cutting Aviation Snip- Black Out Series Our GLIDE-TECH® FORGED BLADES produce the cleanest, fastest, most comfortable cut ...

Midwest MW-D1 16-Inch Duct Stretcher MIDWEST® Duct Stretchers feature an offset handle for increased leverage when used to pull two sheet metal duc...

Midwest MWT-N1-S 31-Degree Notcher MIDWEST® 31° Notchers feature a 1″ throat depth and are used when fabricating sheet metal duct to cut a V notch ...

Malco Tools M2003 Max2000® Standard Aviation Snip - Combination Cutting Malco’s original Max2000 features Euro-styled ergonomic handles. Textured, ...