Milwaukee 2962P-22 M18 FUEL™ 1/2 " Mid-Torque Impact Wrench w/ Pin Detent Kit

Our M18 FUEL™ 1/2" Mid-Torque Impact Wrench w/ Pin Detent delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 650 ft-lbs of nut-busting torque and only weighs 5.1 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE™ Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. This MILWAUKEE® 3/8" Impact Wrench is the most compact in its class, giving you access to stubborn fasteners in spaces where larger impact wrenches can’t fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers you full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The included two M18™ REDLITHIUM™ 5.0 batteries fit all M18™ tools, delivering more work per charge and more work over the life of the pack.

Key Features:

• Pin detent locks sockets in place securely, especially while working overhead
• The POWERSTATE™ brushless motor delivers up to 550 ft-lbs. of max fastening torque
• 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal control
• Bolt Removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
• Mode 1 IPMs: 0-900; Mode 2 IPMs: 0-2,100; Mode 3 IPMs: 0-3,100; Mode 4 IPMs: 0-3,100
• Works in up to to 69kV environments
• 6.0" in length provides most access in tight spaces
• Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
• AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening
• Mode 1 RPMs: 0-1,250; Mode 2 RPMs: 0-1,950; Mode 3 RPMs: 0-2,575; Mode 4 RPMs: 0-2,575
• REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
• Compatible with all M18™ batteries & Chargers

Product Specifications:

• Anvil Type: Detent Pin
• IPM: 3500 ipm
• Maximum Torque: 650 ft/lbs
• Fastening Torque: 650.0 ft/lbs
• Nut-Busting Torque: 550 ft/lbs
• Tool Warranty: 5 Year (Tool), 3 Years (Battery)
• Power Source: Cordless
• Motor Type: Brushless
• Material Composition: Aluminum
• Length: 6 in
• Weight: 5.1 lb
• Height: 10.12 in
• Width: 2.74 in
• Nut Busting Torque: 650 (ft-lbs)
• Brushless: Yes
• Battery System: M18
• DRIVE CONTROL: 4-Mode w/ Bolt Removal Mode
• Maximum RPM: 2575 rpm
• Peak Torque: 650 ft/lbs
• RPM Range: 0 - 2,400

INCLCUDES:

• (1) M18 FUEL™ 1/2 " Mid-Torque Impact Wrench w/ Pin Detent(2962P-20)
• (2) M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack(48-11-1850)
• (1) M18™ & M12™ Multi-Voltage Charger(48-59-1812)
• (1) Carrying Case

Milwaukee® M18 FUEL™ Mid-Torque Impact Wrenches from Milwaukee Tool on Vimeo.