Fluke BK120/107 Fluke BK120 SmartTrace™ Breaker Finder and 107 Pocket Digital Multimeter Kit
$234.99
SKU 5587530
Fluke BK120/107 Fluke BK120 SmartTrace™ Breaker Finder and 107 Pocket Digital Multimeter Kit
- Locates the correct breaker quickly and accurately
- Advanced NCV mode enables the detection of AC voltage on supply cords or terminal strips, indicating proximity and actual voltage presence in both low and high voltage situations
- GFCI outlets–with an integrated GFCI test, you can feel secure knowing that your GFCI equipped outlets are functioning properly
- Current and voltage measurements
- Measures resistance and continuity to check for broken wires
The Fluke BK120 with NCV mode
This versatile device simplifies electrical tasks, circuit tracing, and troubleshooting for electricians, homeowners, and maintenance professionals. The BK120 features a Breaker Finder and Transmitter, ensuring accurate circuit breaker identification, eliminating uncertainty, and ultimately saving valuable time. It's suitable for use in CAT III 150 V environments and boasts a comfortable and ergonomic design.
Key Features:
- Dual Sensitivity: Detects AC voltage in low and high voltage situations, enhancing safety
- Built-in GFCI Tester
- Bright flashlight
- Low battery indicator
- Auto sleep mode
Fluke 107 Pocket Digital Multimeter
The Fluke 107 is a compact, rugged digital multimeter that fits in your pocket. It's ideal for quick troubleshooting, offering reliable measurements for AC/DC voltage, current, resistance, capacitance, diode, frequency, and duty-cycle. With a CAT III 600V safety rating, it ensures your safety on the job.
Key Features:
- AC and DC voltage
- AC and DC current
- Resistance
- Capacitance
- Diode
- Frequency and duty-cycle
Fluke BK120 SmartTrace™ Breaker Finder
| BK 120 Transmitter | BK120 Receiver | |
| Safety rating: | CAT III 150 V | CAT III 150 V |
| Rated operating voltage: | 110 V AC to 125 V AC at 6 mA | — |
| Rated frequency: | 50/60 Hz | — |
| GFCI test: | ✓ | — |
| Wiring check: | ✓ | — |
| Wiring indication: | 1 red, 2 green | — |
| Breaker finder indication: | — | Visual and audio |
| NCV detection: | — | 90 V AC to 240 V AC, 50/60 Hz Dual sensitivity Visual and audio indications |
| Flashlight: | — | ✓ |
| Auto power off: | — | ✓ |
| Low battery indication: | — | ✓ |
| Power supply: | Line powered | 2 AAA |
Fluke 107 Pocket Digital Multimeter
Accuracy is available for one year after calibration, operating from 18 °C to 28 °C and relative humidity from 0% to 75%. The format of the accuracy specification is: ± ([% of reading] + [least significant digit])
| Precision specifications | ||||
|
AC voltage (40 Hz to 500 Hz)1 |
Range | Resolution | Accuracy | |
| 6.000 V 60.00 V 600.0 V |
0.001 V 0.01 V 0.1 V |
1.0 % + 3 | ||
| DC voltage: | 6.000 V 60.00 V 600.0 V |
0.001 V 0.01 V 0.1 V |
0.5 % + 3 | |
| Exchange millivolts: | 600.0 mV | 0.1 mV | 3.0 % + 3 | |
| Diode test2 | 2.000 V | 0.001 V | 10 % | |
|
Resistance (ohm): |
400.0 Ω 4.000 kΩ 40.00 kΩ 400.0 kΩ 4.000 MΩ 40.00 MΩ |
0.1 Ω 0.001 kΩ 0.01 kΩ 0.1 kΩ 0.001 MΩ 0.01 MΩ |
0.5 % + 3 0.5 % + 2 0.5 % + 2 0.5 % + 2 0.5 % + 2 1.5% + 3 |
|
| Capacitor3 | 50.00 nF 500.0 nF 5.000 μF 50.00 μF 500.0 μF 1000 μF |
0.01 nF 0.1 nF 0.001 μF 0.01 μF 0.1 μF 1 μF |
2 % + 5 2 % + 5 5 % + 5 5 % + 5 5 % + 5 5 % + 5 |
|
|
Frequency4 Hz (10 Hz – 100 kHz): |
50.00 Hz 500.0 Hz 5.000 kHz 50.00 kHz 100.0 kHz |
0.01 Hz 0.1 Hz 0.001 kHz 0.01 kHz 0.1 kHz |
0.1 % + 3 | |
| Duty cycle4 | 1 % to 99 % | 0.10 % | 1 % typical case5 | |
|
AC current (40 Hz - 200 Hz): |
4.000 A 10.00 A |
0.001 A 0.01 A |
1.5 % + 3 | |
| DC: | 4.000 A 10.00 A |
0.001 A 0.01 A |
1.5 % + 3 | |
|
||||
| Features: | Overload protection | Input impedance (nominal value) | Common mode rejection ratio | Normal mode rejection ratio |
| AC voltage: | 600 V 1 | >10 MΩ <100 pF 2 | >60 dB at 50 Hz or 60 Hz at DC current | − |
| Exchange millivolts: | 600 mV | >1M, <100 pF | >80 dB at 50 Hz or 60 Hz | − |
| DC voltage: | 600 V 1 | >10 MΩ <100 pF | >100 dB at 50 Hz or 60 Hz at DC current | >60 dB at 50 Hz or 60 Hz |
|
||||
| General technical indicators | ||||
| The highest voltage applied to any terminal and ground: | 600 V | |||
| Display (LCD): | 6000 counts, updated three times per second | |||
| Type of battery: | Two AAA batteries (NEDA 24A, IEC LR03) | |||
| Battery life: | At least 200 hours | |||
| Temperature | ||||
| Operating temperature: | 0 °C to 40 °C | |||
| Storage temperature: | -30 °C to 60 °C | |||
| Relative humidity | ||||
| Working humidity: | No condensation below 10 °C ≤ 90 % at 10 °C to 30 °C; ≤ 75 % at 30 °C to 40 °C |
|||
| Working humidity, 40 MΩ range: | ≤ 80 % at 10 °C to 30 °C; ≤ 70 % at 30 °C to 40 °C | |||
| Altitude | ||||
| Working elevation: | 2000 m | |||
| Storage altitude: | 12,000 m | |||
| Temperature coefficient: | 0.1 X (specified accuracy) / °C (<18 °C or >28 °C) | |||
| Current input fuse protection: | 11A, 1000V fast-melting type, must use Fluke designated parts | |||
| Volume (height x width x length): | 142 mm x 69 mm x 28 mm | |||
| Weight: | 200 g | |||
| Protection level: | IEC 60529: IP 40 | |||
| Safety: | IEC 61010-1: 600 V CAT III, pollution degree 2 | |||
| Electromagnetic environment: | IEC 61326-1: Portable | |||
| Electromagnetic compatibility: | Applicable only in Korea. Class A equipment (industrial broadcasting and communication equipment)1 | |||
| 1 This product meets the requirements of industrial (Class A) electromagnetic wave equipment, which should be noted by the seller or user. The device is suitable for use in a work environment, not a home environment. | ||||
Includes:
- BK120
- Breaker Finder Receiver
- Transmitter
- Batteries
- Quick Reference guide
- 107 Pocket Digital Multimeter
- Fluke 107 palm-sized digital multimeter
- (1 pair) TL75 Hard Point™ Test Leads
- (2) AAA batteries (installed)
- SmartStrap™ intelligent magnetic, multi-purpose lanyard
Fluke BK120 SmartTrace Breaker Finder Users Manual
Fluke BK120 SmartTrace Breaker Finder and 107 Pocket Digital Multimeter Data Sheet