Skip to content
Edmondson Supply Will Be Closed April 29th 2024. Final guaranteed shipping time is 12pm EST Thursday, April 28th. Regular shipping will resume Monday, March 1st.
Edmondson Supply Will Be Closed April 29th 2024. Final guaranteed shipping time is 12pm EST Thursday, April 28th. Regular shipping will resume Monday, March 1st.

Saniflo 021 Saniswift Drain Pump, Medium Duty

Save 15%
Original price $358.00
Current price $304.46
SKU 021
Currently 5 in stock.

Saniflo 021 Saniswift Drain Pump, Medium Duty

The Saniswift drain pump is used to pump gray water away from a variety of fixtures in residential applications. The system is able to discharge the waste up to 14 feet vertical and/or 140 feet horizontal.

  • Discharges the waste through either a 1", 1-1/4" or 1-1/2" rigid pipe. A non-return valve is included on the discharge fitting assembly provided with the system.
  • Has been designed with a 1-1/2" vent connection on the top of the lid. All plumbing codes require connection to a vent system. Either inlet located on top of the housing can be used for the vent or as an inlet. Please note that the vent system should be a two-way air vent as air needs to freely flow both ways. Note: The use of mechanical vents, air admittance valves or similar devices is not permitted.
  • Discharges gray water from a kitchen sink, shower, dishwasher, washing machine (indirect connection via laundry sink). The gray water will drain into the system via three 1-1/2" inlets, two low inlets (with built-in check valves) on either side of the housing and one on top of the enclosure.

An easy solution for a remote laundry room installation or for any gray water application.

  • Residential drain pump
  • ↑ 14 Ft ↑ and/or ← 140 Ft →
  • Compact design
  • Powerful and economical

AN EASY SOLUTION FOR A REMOTE LAUNDRY ROOM INSTALLATION OR FOR ANY GRAY WATER APPLICATION

Powerful and economical with a compact design and multiple inlets which makes it perfect for installations anywhere you can imagine. The perfect quiet solution designed with low drain inlets which facilitate the installation of a shower in residential applications. Built-in check valves prevent any backup into the connecting fixtures.

 

Product Sheet

Instruction Manual

 

Technical Specifications

Pump Type:
Drain pump
Electrical: 120V - 60Hz / 4.5 Amps (Max)
Motor: 0.3 HP oil-filled thermally protected motor
Capacitor Rating: 30 microfarad
Operating Temperature: 140°F
Power Cord Length: 48 inches
Noise Level: ≤ 44 dBA (Lp) (measured at 3 ft.)
Discharge Pipe Diameter: 1" - 1-1/2"
Discharge Rate at 25 ft: 18 GPM
Discharge Rate at 3 ft: 24 GPM
Shut-off Head: 25 ft
Normal Running Time: 3-5 seconds (short bursts)
Capacity: 2.75 gallons / 10.4 liters
Inlets: 1-1/2" (sides), 1-1/2" vent (top)
Method of Activation: Pressure Switch / Circuit Board
Shower/Bathtub Base Height: 6" min
Weight: 13 lbs / 5.9 kg
Certifying Agencies: CSA (IPC, NSPC)
Recommended Accessories: Descaler
Connections: Sink, shower, washing machine (indirect), dishwasher, laundry sink, etc.