Saniflo Sanibest Pro Elongated Bowl Toilet/Grinder Pump Combo

The Sanibest Pro is a 1 HP pump system used to install a complete bathroom up to 25 feet below the sewer line, or even up to 150 feet away from a soil stack. It incorporates a grinder system which is ideal for uncontrolled environments in both residential and commercial applications (ie. rental unit, offices, warehouses, etc). The Sanibest Pro is designed to handle sanitary products that may have been flushed down the toilet; such may consist of condoms, sanitary napkins, q-tips, dental floss, etc.

• Discharges the waste through a 3/4" or 1" rigid pipe. A non-return valve is included on the discharge elbow assembly provided with the system. This elbow can be rotated 360 degrees depending on the discharge installation. 
• Has been designed with a 1-1/2" vent connection on the top of the lid. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent as air needs to freely flow both ways. Note: The use of mechanical vents, air admittance valves or similar devices is not permitted.
• Must be connected to Saniflo's 1.28 GPF / 4.8 LPF rear discharge toilet. These toilets come in round and elongated (ADA compliant) models. More technical information on page 6.
• Will also discharge gray water from any sink, bath/shower, urinal and even a washing machine (indirect connection). The wastewater will drain into the system via two 2" inlets with built-in check valves on either side of the housing. Note that when adding a bathtub/shower, the base should be raised up by a minimum of 8" off the floor.
• An easy access service panel is located on top of the pump. This will give you easy access to the electrical components such as the capacitor, microswitch, electronic board and membrane. 

The Sanibest Pro is the best solution to install a full bathroom in demanding situations.

• For full bathroom applications
• ↑ 25 Ft ↑ and/or ← 150 Ft →
• Grinder system designed to handle sanitary products
• Easy access service panel

Saniflo’s vitreous china toilets are designed to be durable with a high gloss finish for an easy-to-clean surface. These floor mounted, rear discharge toilets have the desired height to meet comfort and aesthetics to provide a unique style. Saniflo’s high efficiency toilets use 1.28 gallons per flush, and are recognized by the EPA’s water-saving WaterSense program. Complete toilet system comes with everything needed for installation including a stylish soft-close toilet seat.

Combo Includes:

• Sanibest Pro grinder (Part No. 013)
• Toilet Tank (Part No. 005)
• Insulated 1.28 GPF / 4.8 LPF toilet tank equipped with all internal valves.
• Elongated Bowl
• Rear discharge toilet with 16-3/4" seating height (Elongated bowl is ADA compliant). 
• Soft-close toilet seat

Product Sheet

Instruction Manual

Technical Specifications