Freud

Freud 04-106 1/4" Double Flute Straight Bit Freud's huge selection of carbide tipped and solid carbide double flute straight bits are ideal for gro...

Freud 89-650 4 Piece Undersized Plywood Bit Set Freud Undersize Plywood bits are designed to rout perfectly fitted grooves and dadoes for today's u...

Freud 87-308 3-Piece CNC Fine Detail Router Bit Set With over 25 years’ experience in developing premium CNC bits combined with being the only manu...

Freud 87-408 3-PieceCNC Lettering & Sign Making Set Freud's 3 Piece Lettering and Sign Making Set offers the essential combination of router bi...

Freud 87-108 8 Piece CNC Router Bit Signmaking Set This collection of solid carbide and carbide tipped bits is the perfect way to get into signmaki...

Freud 82-116 3/8" Radius Half Round Bit (Shank Diameter: 1/2") Half Round Bits produce a fully rounded semicircular edge on dimensional lumber. In ...

Freud 82-114 1/4" Radius Half Round Bit (Shank Diameter: 1/2") Half Round Bits produce a fully rounded semicircular edge on dimensional lumber. In ...

Freud 80-124 3/16" Radius Traditional Beading Bit (Shank Diameter: 1/2") Traditional Beading Bits are a great solution when a project requires matc...

Freud 80-104 3/16" Radius Traditional Beading Bit (Shank Diameter: 1/4") Traditional Beading Bits are a great solution when a project requires matc...

Freud 80-102 1/8" Radius Traditional Beading Bit (Shank Diameter: 1/4") Traditional Beading Bits are a great solution when a project requires match...

Freud 77-204 3/8" Double Compression Bit with 3/8" Shank Compression Spiral bits eliminate chipping on both sides of double-sided veneers or lamina...

Freud 76-100 1/8" Down Spiral Bit Down spiral bits are a great choice for grooves and dadoes in single-sided veneers and laminates where chip remov...

Freud 75-108 1/2" Up Spiral Bit Solid carbide up spiral bits combine effective chip removal with a cut quality that can’t be matched by standard st...

Freud 75-104 5/16" Up Spiral Bit Solid carbide up spiral bits combine effective chip removal with a cut quality that can’t be matched by standard s...

Freud 75-025 1/4" O-Flute Up Spiral Bit Freud O-Flute bits are designed for smooth finishes on solid surface and plastics such as ABS, UHMW, acryli...

Freud 73-762 1/8" O-Flute Up Spiral Bit Freud O-Flute bits are designed for smooth finishes on solid surface and plastics such as ABS, UHMW, acryli...

Freud 72-400 5.4° x 1/16" Tapered Ball Tip 5.4° x 1/16" Tapered Ball Tip Solid Carbide Bit. Includes 4 flutes and 1/16" diameter. 1/4" Shank. A gre...

Freud 72-300 6.2° x 1/32" Tapered Ball Tip 6.2° x 1/32" Tapered Ball Tip Solid Carbide Bit. Includes 3 flutes and 1/32" diameter. 1/4" Shank. This ...

Freud 72-202 1/4" x 1-1/8" Up Cut Spiral Ball Nose 1-1/8" Up Cut Spiral Ball Nose Solid Carbide Bit. Includes 2 flutes and 1/4" diameter. 1/4" Shan...

Freud 72-101 1/4" x 1/2" Up Cut Spiral Ball Nose 1/2" Up Cut Spiral Ball Nose Solid Carbide Bit. Includes 2 flutes and 1/4" diameter. 1/4" Shank. F...

Freud 70-103 7.5° x 3/16" Engraving V-Groove 7.5° x 3/16" Engraving V-Groove Solid Carbide Bit. 1/2" Cutting Length. 1/4" Shank. Perfect for engrav...

Freud 66-100 1/4" Bevel Trim Bit (7°) Bevel Trim Bits produce a clean, finished edge on plastic laminates with little or no filing. Choose among be...

Freud 64-100 1/4" Solid Carbide Flush Trim Bit Self-piloting solid carbide trim bits are an efficient, cost-effective way to cut plastic laminate q...

Freud 63-162 9/16" Depth Slotting Cutter Set (Shank Diameter: 1/2") Slotting Cutter Sets come complete with an arbor, bearing and clean-cutting 3-w...

Freud 60-100 5/16" Slotting Cutter Arbor with 1/4" Shank Producing smooth, precise, accurate slots. For premium performance use with Freud slotting...

Freud 58-100 1/16" Slot Four Wing Slotting Cutter Use 4-wing Slot Cutters for the cleanest possible grooves in hardwood, softwood, plywood or compo...

Freud 56-108 1/8" Slot Three Wing Slotting Cutter Should be used with Freud's slotting cutter arbors 60-100 for 1/4" shanks and 60-102 for These cu...

Freud 56-106 3/32" Slot Three Wing Slotting Cutter Should be used with Freud's slotting cutter arbors 60-100 for 1/4" shanks and 60-102 for These c...

Freud 56-100 1/16" Slot Three Wing Slotting Cutter Should be used with Freud's slotting cutter arbors 60-100 for 1/4" shanks and 60-102 for These c...

Freud 54-760 Glass/Screen Panel Door Add-on Cutter Freud's unique Premier Adjustable Rail and Stile System builds perfect doors in material from 5/...

Freud 50-509 3/4" Top & Bottom Bearing Flush Trim Bit The perfect bits for template routing, the Top & Bottom Bearing Flush Trim Bits allow...

Freud 50-126 1-1/4" Top Bearing Flush Trim Bit Ideal for following templates, routing sign lettering and other tasks where the pattern is placed on...

Freud 50-122 1-1/8" Top Bearing Flush Trim Bit Ideal for following templates, routing sign lettering and other tasks where the pattern is placed on...

Freud 50-116 3/4" Top Bearing Flush Trim Bit (Shank Diameter: 1/2") Ideal for following templates, routing sign lettering and other tasks where the...

Freud 50-104 5/8" Top Bearing Flush Trim Bit (Carbide Height: 1") Ideal for following templates, routing sign lettering and other tasks where the p...

Freud 50-102 1/2" Top Bearing Flush Trim Bit Ideal for following templates, routing sign lettering and other tasks where the pattern is placed on t...